Aviteq

Product -

32005 - SAE-GS60-2

Custom code: 85365003

CONTROLLER

Technical specification:

440.. 480V 60HZ 25A IP00 Dimensions 200 x 230 x 140 mm (HxWxD) VIBTRONIC® -S controller for connecting AVITEQ vibrating conveyors. The swing width of the conveyor can be adjusted continuously on the connection device become. Delivery rate adjustment range from close to 0 to 100%. With a complete set of potentiometers for manual swing range adjustment. Electromagnetic compatibility (EMC) in accordance with the applicable EC Directive checked. As network protection, we recommend protection in accordance with the rated current of connected magnetic vibrator (sluggish fuse). Vibration rate SA.. 60.. 3,600 min-1 Display Seven LEDs show the operating status version for installation in central control stations, power cable without incl. control potentiometer set Thyristor protection, via fuse (superflink) Network fluctuation compensation ± 10%, the oscillation width remains constant Network tolerance, allowable voltage ± 10% Frequency ± 0.5% Proportional change in the setpoint range Switch release (continuous contact, potential-free) or voltage signal +24 V (DC) or optocoupler Inputs to external external control variables 0.. 10 V (DC), 0/4.. 20 mA (DC) Sensor input for AViTEQ PA or PAL vibration sensor Remote monitoring outputs, relay output protective function When used on magnetic vibrators with an integrated PAL sensor Version SA.. -2 MV-... P (8V) Voltage and frequency control with impact monitoring When used with an external PA vibration sensor Version SA.. 2S1 payload control Magnetic Vibrator Temperature Switch Monitoring Additional TXAE board required when operating with multiple drives (version.. - 2X)

We sale only new and original product!